Ymagine? Direct-rolled
Structural steel

Ymagine? S1 is a direct-rolled, pickled and oiled, structural steel.

It provides a viable alternative to cold-rolled and hot-rolled steel and is suitable for a range of production processes. Consistent quality delivers trouble-free processing and helps to maximise yield.

Raching systems made using Tata Steel
Product specification
Structural steel is currently available in the following grades

EN-Engineering-Product-Ymagine Direct-rolled-Stractural steel-Ymagine S1

Ymagine S1
Specification details for Ymagine S1

EN-Engineering-Product-Direct-rolled-Structural steel-Ymagine S1-Properties

Properties

Mechanical properties

The mechanical properties are measured transverse to the rolling direction:

?

Relationship with European standard

ReH?/ Rp

Rm

A80

Adp5

EN 10025-2: 2004, S235JR

N/mm2

N/mm2

%

%

? ? ?

t < 3

t?≥ 3

Hot-rolled flat products

≥ 235

360 - 510

≥ 17

≥ 24

?

Ymagine?S1

Rp

Rm

A80

Adp5

?

N/mm2

N/mm2

%

%

? ? ?

t < 3

t?≥ 3

Typical value

300

395

28

-

Guaranteed values

235 - 360

360 - 510

≥ 19

24

?

Chemical composition

Cast analysis in weight percentages:

Ymagine?S1

C

Mn

P

S

Si?1

Typical

0.045

0.220

0.008

0.007

0.018

Guaranteed (max)

0.065

0.300

0.025

0.015

0.035

1.?For the purpose of batch galvanising, Ymagine S1 can be ordered on consultation with?a maximum Si content of 0.030%.

?

EN-EngineeringAutomotive-Product-Ymagine Direct-rolled-All grades Shape and dimensional tolerances

Shape and dimensional tolerances

Shape and dimensional tolerances

Tolerances on thickness

Ymagine?is available with the following tolerances.

Dimensions in mm:

Thickness

Tolerances

1.15 ≤ t ≤ 2.0

± 0.05

2.0 < t ≤ 2.5

± 0.06?1

2.5?< t ≤ 3.0

± 0.07?2

3.0 < t?≤ 4.0

± 0.09?3

1.?In some instances, the material will be supplied with a tolerance of -0.06/+0.15 mm,??
? ?only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
2.?In some instances, the material will be supplied with a tolerance of -0.07/+0.17 mm,??
? ?only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
3.?In?some instances, the material will be supplied with a tolerance of -0.09/+0.21 mm,??
? ?only on the coil head and tail and to a maximum of 20 metres from the start of the coil.
?

Tolerances on width

Width tolerances comply with standard EN 10051: 2010 (hot-rolled)?and
EN 10131: 2006 (cold-rolled). Closer tolerances are possible – please contact us for details.
?

Width tolerances for Hot-rolled products?

Tolerances in mm.

Nominal width w
Mill edges Trimmed edges
lower upper lower upper

?w ≤ 1200

0

20

0

3

?1200 < w ≤ 1850

0

20

0

5

?w > 1850

0

25

0

6

?

Width tolerances for Cold-rolled products

Tolerances in mm.

Nominal width w

Normal tolerances

Special tolerances (S)

Under

Over

Under

Over

w ≤ 1200

0

4

0

2

1200 <?w?≤ 1500

0

5

0

2

w > 1500

0

6

0

3

Special width tolerances may be available?(± 0.50 mm available?on 750 - 2000 mm width). Please contact us for details.
?

Dimensions and coil weights

The weight of weld-free coils can be specified freely between 13 and 20.5 kg/mm.

Ymagine?is supplied with trimmed edges as standard. Mill edges are available on request.

Description

Dimension or weight

Outside diameter

minimum 1050 mm

maximum 2000 mm (Ymagine)

maximum 2100 mm (mill scale)

Coil Weight

maximum 31.5 tonne?1

1.?For Ymagine?H500 the maximum coil weight is 25 tonne for thicknesses > 2.5 mm.
Above 3.20 mm maximum coil weight for all grades is 25 tonne. Higher coil weights available on request.

Tata Steel assumes a minimum and a maximum coil weight agreed upon with the customer?on?the basis of our normal production practices and an order quantity corresponding to this coil weight. Usually a minimum coil weight up to 90% of the maximum coil weight can be requested.
?

Surface aspects

The surface quality of Ymagine?is comparable to hot-rolled pickled and oiled?i.e. 1 - 3 μm Ra (cut off 2.5mm).
Ymagine is suitable for cold-rolled applications that are not surface-critical.

?

EN-EngineeringAutomotive-Product-Hot-rolled-Heavy+Light further processing

Further processing

Further processing

We have a broad network of Tata Steel service centres across Europe, offering decoiling and slitting services from stock and against short lead times.

Heavy gauge processing

Processing type Decoiling
Thickness range (mm) 1.4 - 25.4
Width range (mm) 300 - 2600
Length range up to 18.4m
Locations UK
Netherlands

?

Light gauge processing

Processing type Slitting Decoiling Blanking
Thickness range (mm) 0.2 - 7.0 0.3 - 6.0 0.3 - 6.0
Width range (mm) 10 - 2050 50 - 2600 200 - 2600
Length range - up to 6m up to 6m
Locations UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Ireland
Netherlands
Germany
France
Spain
Sweden
Norway
Finland
UK
Netherlands


For further information please visit our Service Centre webpages.

?